Can a gas steam generator burn out water pipes due to lack of water?

 
Gas steam generator occurs mildly less water, the premise of enabling the steam plug of the water level meter, restore normal operation, reduce fuel and air supply, reduce combustion, slowly supply the steam generator, then the gas steam generator running a serious lack of water will not burn the water pipe? Next, I will look at it together.
If the gas steam generator is seriously low water, steam generator steaming heated surface of the pipeline will overheat, deformation or even collapse. Pipeline expansion port leakage can also lead to the expansion of the pipe fall down; heating surface steel overheating or overheating, reduce or lose the load-bearing capacity, pipe explosion; furnace wall damage, etc.. If not handled correctly, may lead to more serious consequences.
False water levels in gas steam generators are created by steam, clogged water pipes, and leaking plugs; steam is all released from the steam generator water-cooled walls, convection tube bundles, heat exchanger tubes, or flue tubes by bursting. When there is less water, you can use the water level meter to take water to determine whether there is a slight water shortage or serious water shortage. The procedure for water intake is: open the water level gauge drain plug; close the water level gauge steam plug; and close the water gauge drain plug. At this point, if there is a water level in the water level gauge, the steam generator will be a little short of water, otherwise it will be seriously short of water.
Of course you can choose the gas steam generator produced by the steam generator manufacturer, equipped with intelligent IoT remote control system, to avoid such a dry burning situation.